The Branson/TYM 2515H instrument cluster provides essential warnings and indicators for safe operation. This compact tractor features a simple yet informative dashboard with key alerts for engine, transmission, and hydraulic systems. Understanding these lights helps prevent damage and downtime.
Branson/TYM 2515H Warning Light Symbols
| Symbol | Name | Color | What it means | What to do |
|---|---|---|---|---|
| Master Warning (Stop) | RED | This red stop light on the Branson/TYM 2515H illuminates when a critical fault is detected, such as engine oil pressure loss or brake failure. | Immediately stop the engine and consult the operator manual to identify the specific fault. | |
| Check Engine (MIL) | AMBER | This amber light in the 2515H indicates an engine management issue, such as a faulty sensor or emission control problem. | Reduce load and have the engine diagnosed by a dealer as soon as possible. | |
| Engine Oil Pressure | RED | When lit, this red warning means the engine oil pressure is below safe levels in your 2515H, risking severe engine damage. | Stop the engine immediately and check oil level; if full, do not restart and call for service. | |
| Battery / Charging | RED | This red light on the 2515H warns that the battery is not being charged properly, often due to a failed alternator or loose belt. | Check battery connections and alternator belt; if light stays on, have the charging system inspected. | |
| Coolant Temperature | RED | A red coolant temperature light on your 2515H means the engine is overheating, which can cause rapid damage if ignored. | Stop the engine and allow it to cool; check coolant level and radiator for blockages. | |
| Glow Plug / Preheat | AMBER | This amber indicator on the 2515H shows the glow plugs are heating for cold start; it goes out when preheating is complete. | Wait until the light turns off before cranking the engine. | |
| Low Fuel | AMBER | When this amber symbol glows on your 2515H, the fuel level is low and refueling is needed soon to avoid air in the system. | Refill the fuel tank with clean diesel to prevent engine stalling. | |
| High Beam | BLUE | This blue light indicates the high beam headlights are active on the 2515H, providing brighter illumination for night work. | Dim the lights when approaching other vehicles to avoid glare. | |
| Parking Brake | RED | This red symbol on the 2515H appears when the parking brake is engaged; it should be off before driving to avoid brake damage. | Release the parking brake fully before moving the tractor. | |
| Water in Fuel | AMBER | This amber warning on the 2515H alerts that water has accumulated in the fuel filter/water separator, which can damage the injection system. | Drain the water from the separator as outlined in the operator manual. | |
| Differential Lock | AMBER | This amber icon on the 2515H indicates the differential lock is engaged for maximum traction in slippery conditions. | Disengage the diff lock when turning or on hard surfaces to avoid driveline stress. | |
| PTO Engaged | AMBER | When this amber light is on, the power take-off (PTO) shaft is engaged on your 2515H, spinning attached implements. | Make sure all guards are in place and no one is near the PTO before operating. | |
| Service / Hour Meter | GREEN | This green symbol on the 2515H flashes or remains steady to indicate that scheduled maintenance is due based on engine hours. | Check the hour meter and perform the required service (oil change, filter, etc.) as per manual. | |
| Work Lights | BLUE | This blue light shows that the rear or auxiliary work lights are on, improving visibility around the 2515H during dark operations. | Turn off work lights when not needed to conserve battery. | |
| Brake System | RED | This red warning on the 2515H indicates a problem in the brake system, such as low brake fluid or worn pads. | Check brake fluid level and consult a dealer if the light persists. |
15 symbols shown. Icons follow ISO 2575 dashboard standards; exact graphics vary by model year.
Most Important Warning Lights
Engine Overheating
Common causes
- Low coolant level
- Clogged radiator or screens
- Failed water pump or thermostat
What to do
For the 2515H, immediately stop the engine, let it cool, then clean the radiator screens and check coolant level. If the problem persists, inspect the water pump and thermostat seal.
Low Engine Oil Pressure
Common causes
- Low oil level
- Oil pump failure
- Clogged oil filter or passages
What to do
On the 2515H, stop the engine right away, check the dipstick and add oil if low. If the light remains off after restarting, do not run the engine and have the oil pump and filter serviced.
Charging System Failure
Common causes
- Loose or broken alternator belt
- Faulty alternator
- Bad battery connection
What to do
For the 2515H, inspect the alternator belt tension and condition, tighten or replace if needed. Check battery terminals for corrosion and clean them. If the battery light stays on, test the alternator output.
Brake System Malfunction
Common causes
- Low brake fluid level
- Worn brake pads or shoes
- Air in hydraulic brake lines
What to do
In the 2515H, check the brake fluid reservoir under the hood and top up with DOT 3 fluid. If the light remains, bleed the brakes to remove air or replace worn components.
Frequently Asked Questions
Why is the red stop light on my Branson/TYM 2515H flashing?
The red stop light (master warning) flashes when a critical fault is detected, such as loss of oil pressure or brake failure. Stop the engine immediately and refer to the manual to identify the specific issue.
What does the amber water in fuel light mean on the 2515H?
It means water has accumulated in the fuel water separator. Drain the sediment bowl by turning the drain valve at the bottom of the separator until clear diesel flows, then close it.
How long should I wait for the glow plug light on my 2515H?
The glow plug light typically stays on for 5-10 seconds in cold weather. Wait until it turns off before cranking the engine to ensure proper cold start.
Can I drive the 2515H with the check engine light on?
You can operate with reduced load, but have the tractor inspected soon. The light may indicate a sensor issue or emission problem that could lead to poor performance or damage.
Why does the service hour meter light flash on my 2515H?
The flashing green service indicator alerts that scheduled maintenance is due based on elapsed hours. Check the hour meter reading and perform the required service (e.g., oil change, filter replacement) as per the manual.
What should I do if the differential lock light stays on while driving?
If the diff lock light remains on when you haven't engaged it, try disengaging with the pedal/switch. If it stays lit, the mechanism may be stuck. Drive straight and gently tap the pedal to release. If persistent, consult a dealer.